Ambient Weather WS-2000 User Manual

Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 28
2. Set Date. (month:day:year) Press to set the date. The month field will turn red. Press
or to select month, day or year. Press or to increase or decrease
the value.
3. Set Time Zone. Press to set the time zone. Press to increase the time zone
and to decrease the time zone. With time zone highlighted, press to set
Daylight Savings Time (DST). Press to toggle ON or OFF. Note: the DST should be
always checked to automatically update the time when DST changes.
4. Set Time Server. The default time server is time.nist.gov. Press to set the time server.
Press again to turn ON. Press to toggle ON or OFF. Press to
immediately to highlight Update and to immediately update.
Note: The time server will not work until the Wi-Fi connection has been set up.
Figure 28
scroll
value up
scroll
value
down
Select
value
Select
value
Scroll field
up
Scroll
field
down
return
to Setup

Ambient Weather WS-2000 Specifications

General

Display Type	Color LCD
Connectivity	Wi-Fi
Power Source (Console)	AC Adapter
Transmission Frequency	915 MHz
Data Logging	Yes
Indoor Temperature Range	32°F to 140°F (0°C to 60°C)
Indoor Humidity Range	10% to 99%
Outdoor Humidity Range	10% to 99%
Wind Direction	0° to 360°
UV Index Range	0 to 15
Console Display	Color
Sensors Included	Temperature, Humidity, Wind Speed, Wind Direction, Rainfall, UV, Solar Radiation
Power Source (Sensor Array)	Solar Panel with Battery Backup
Outdoor Sensor Range	Up to 330 feet (100 meters)
Transmission Range	Up to 330 ft (100 m) line of sight
Update Rate	16 seconds
Data Update Interval	16 seconds
Outdoor Temperature Range	-40°F to 140°F (-40°C to 60°C)
Rainfall Accuracy	+/- 5%
Rainfall Range	0 to 393.7 inches (0 to 9999 mm)
Wind Speed Range	0 to 100 mph (0 to 160 km/h)
Solar Radiation Range	0 to 1800 W/m²