EasyManuals Logo

Ambient Weather WS-2000 User Manual

Ambient Weather WS-2000
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 11
1. Insert two AA batteries.
2. After inserting the batteries, the remote sensor will display temperature, humidity and
barometric pressure on the display, as shown in Figure 9.
Figure 9
5.7 Indoor/Outdoor Thermo-Hygrometer, 8 Channel (optional)
The WS-2000 supports up to 8 additional thermo-hygrometer sensors (WH31), which can be viewed
on the display tablet and Internet.
Note: Do not use rechargeable batteries. We recommend fresh alkaline batteries for outdoor
temperature ranges between -4 °F and 140 °F and fresh lithium batteries for outdoor temperature
ranges between -40 °F and 140 °F.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ambient Weather WS-2000 and is the answer not in the manual?

Ambient Weather WS-2000 Specifications

General IconGeneral
Display TypeColor LCD
ConnectivityWi-Fi
Power Source (Console)AC Adapter
Transmission Frequency915 MHz
Data LoggingYes
Indoor Temperature Range32°F to 140°F (0°C to 60°C)
Indoor Humidity Range10% to 99%
Outdoor Humidity Range10% to 99%
Wind Direction0° to 360°
UV Index Range0 to 15
Console DisplayColor
Sensors IncludedTemperature, Humidity, Wind Speed, Wind Direction, Rainfall, UV, Solar Radiation
Power Source (Sensor Array)Solar Panel with Battery Backup
Outdoor Sensor RangeUp to 330 feet (100 meters)
Transmission RangeUp to 330 ft (100 m) line of sight
Update Rate16 seconds
Data Update Interval16 seconds
Outdoor Temperature Range-40°F to 140°F (-40°C to 60°C)
Rainfall Accuracy+/- 5%
Rainfall Range0 to 393.7 inches (0 to 9999 mm)
Wind Speed Range0 to 100 mph (0 to 160 km/h)
Solar Radiation Range0 to 1800 W/m²

Related product manuals