Ambient Weather WS-2000 User Manual

Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 50
6.8 Alarm Mode
Press to Enter the Alarm Mode
The upper alarm is displayed on the right and the lower alarm is displayed on the left. If the measured
value is greater than the maximum alarm setting, the alarm will sound. If the measured value is less
than the minimum alarm setting, the alarm will sound.
To adjust the alarm, press to scroll to the alarm setting you wish to change. Press to
highlight the sign (positive vs. negative) and significant digit. Press to change the value.
To set the alarm,, press to highlight the alarm symbol and press to toggle the
alarm ON or OFF.
When a weather alarm condition has been triggered, the alarm will sound for 120 seconds and the
corresponding icon will flash red for the high alert limit, and blue for the low alert limit, until
the weather condition is no longer present. Press any key to mute the alarm.
You can also set a time of day alarm using the same method

Ambient Weather WS-2000 Specifications

General

Display Type	Color LCD
Connectivity	Wi-Fi
Power Source (Console)	AC Adapter
Transmission Frequency	915 MHz
Data Logging	Yes
Indoor Temperature Range	32°F to 140°F (0°C to 60°C)
Indoor Humidity Range	10% to 99%
Outdoor Humidity Range	10% to 99%
Wind Direction	0° to 360°
UV Index Range	0 to 15
Console Display	Color
Sensors Included	Temperature, Humidity, Wind Speed, Wind Direction, Rainfall, UV, Solar Radiation
Power Source (Sensor Array)	Solar Panel with Battery Backup
Outdoor Sensor Range	Up to 330 feet (100 meters)
Transmission Range	Up to 330 ft (100 m) line of sight
Update Rate	16 seconds
Data Update Interval	16 seconds
Outdoor Temperature Range	-40°F to 140°F (-40°C to 60°C)
Rainfall Accuracy	+/- 5%
Rainfall Range	0 to 393.7 inches (0 to 9999 mm)
Wind Speed Range	0 to 100 mph (0 to 160 km/h)
Solar Radiation Range	0 to 1800 W/m²