EasyManuals Logo

Ambient Weather WS-2000 User Manual

Ambient Weather WS-2000
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 55
Note: The purpose of calibration is to fine tune or correct for any sensor error associated with the
devices margin of error. Errors can occur due to electronic variation (example, the temperature sensor
is a resistive thermal device or RTD, the humidity sensor is a capacitance device), mechanical
variation, or degradation (wearing of moving parts, contamination of sensors).
Calibration is only useful if you have a known calibrated source you can compare it against and is
optional. This section discusses practices, procedures and sources for sensor calibration to reduce
manufacturing and degradation errors. Do not compare your readings obtained from sources such as
the internet, radio, television or newspapers. The purpose of your weather station is to measure
conditions of your surroundings, which vary significantly from location to location.
6.10 Factory and Data Export
Press to Enter the Factory Default Mode
Figure 52
Select
Setting
Select
Setting
Scroll left
Scroll
right
Scroll field
up
Scroll
field
down
Enter
sub-setup
mode
return
to home

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ambient Weather WS-2000 and is the answer not in the manual?

Ambient Weather WS-2000 Specifications

General IconGeneral
Display TypeColor LCD
ConnectivityWi-Fi
Power Source (Console)AC Adapter
Transmission Frequency915 MHz
Data LoggingYes
Indoor Temperature Range32°F to 140°F (0°C to 60°C)
Indoor Humidity Range10% to 99%
Outdoor Humidity Range10% to 99%
Wind Direction0° to 360°
UV Index Range0 to 15
Console DisplayColor
Sensors IncludedTemperature, Humidity, Wind Speed, Wind Direction, Rainfall, UV, Solar Radiation
Power Source (Sensor Array)Solar Panel with Battery Backup
Outdoor Sensor RangeUp to 330 feet (100 meters)
Transmission RangeUp to 330 ft (100 m) line of sight
Update Rate16 seconds
Data Update Interval16 seconds
Outdoor Temperature Range-40°F to 140°F (-40°C to 60°C)
Rainfall Accuracy+/- 5%
Rainfall Range0 to 393.7 inches (0 to 9999 mm)
Wind Speed Range0 to 100 mph (0 to 160 km/h)
Solar Radiation Range0 to 1800 W/m²

Related product manuals