EasyManuals Logo

Ambient Weather WS-2000 User Manual

Ambient Weather WS-2000
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 56
1. Re-register Transmitter Indoor. Re-synchronizes the wireless signal from the indoor
thermo-hygrometer-barometer. Press to highlight this field.
Press or key to select re-register indoor transmitter. Press or
key to popup the Message Box” Are you sure you want to register the new indoor
transmitter? Press or to select Yes or No. Press the key or key
to confirm the selection.
2. Re-register Transmitter Outdoor. Re-synchronizes the wireless signal from the outdoor
sensor array. Press to highlight this field.
Press or key to select re-register indoor transmitter. Press or
key to popup the Message Box” Are you sure you want to register the new outdoor
transmitter? Press or to select Yes or No. Press the or key
to confirm the selection.
3. Clear History. Clears all the historical data in archive memory. Press to highlight this
field.
Press or key to select re-register indoor transmitter. Press or
key to popup the Message Box” Are you sure you want to clear history? Press or
to select Yes or No. Press or key to confirm the selection.
4. Automatic Clear Max/Min. Clears all the minimum and maximum values in stored memory
at Midnight every day. Press to highlight this field.
Press to switch between automatic clear manually (OFF) or automatic clear daily
(ON).
5. Reset to Factory. Clears all stored memory, calibrations and other variables to factory default.
Press to highlight this field.
Press to proceed. Press or key to popup the Message BoxAre you

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ambient Weather WS-2000 and is the answer not in the manual?

Ambient Weather WS-2000 Specifications

General IconGeneral
Display TypeColor LCD
ConnectivityWi-Fi
Power Source (Console)AC Adapter
Transmission Frequency915 MHz
Data LoggingYes
Indoor Temperature Range32°F to 140°F (0°C to 60°C)
Indoor Humidity Range10% to 99%
Outdoor Humidity Range10% to 99%
Wind Direction0° to 360°
UV Index Range0 to 15
Console DisplayColor
Sensors IncludedTemperature, Humidity, Wind Speed, Wind Direction, Rainfall, UV, Solar Radiation
Power Source (Sensor Array)Solar Panel with Battery Backup
Outdoor Sensor RangeUp to 330 feet (100 meters)
Transmission RangeUp to 330 ft (100 m) line of sight
Update Rate16 seconds
Data Update Interval16 seconds
Outdoor Temperature Range-40°F to 140°F (-40°C to 60°C)
Rainfall Accuracy+/- 5%
Rainfall Range0 to 393.7 inches (0 to 9999 mm)
Wind Speed Range0 to 100 mph (0 to 160 km/h)
Solar Radiation Range0 to 1800 W/m²

Related product manuals