Ambient Weather WS-2000 User Manual

Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 6
(a)
(b)
Figure 2
5.3.2 Install Wind Cups
Reference Figure 3. (a) push the wind cups on to the shaft. (b) tighten the set screw with a precision
screwdriver and make sure the wind cups spin freely.
Note: You may need to back out the set screw first before sliding the cups onto the shaft.
(a)
(b)
Figure 3
5.3.3 Install U-Bolts
Note: Your U-bolts may have come preassembled at the factory.
(a) Insert the U-Bolts into the sensor array mounting bracket and hand tighten the nuts.
(b) Tighten the nuts to fit the size of your mounting pole (between 1” and 2” diameter).
(c) Insert the sensor array and U-Bolt assembly onto the mounting pole.
(d) Tighten the U-Bolts around the pole with an adjustable wrench. Make sure the sensor array is
level.

Ambient Weather WS-2000 Specifications

General

Display Type	Color LCD
Connectivity	Wi-Fi
Power Source (Console)	AC Adapter
Transmission Frequency	915 MHz
Data Logging	Yes
Indoor Temperature Range	32°F to 140°F (0°C to 60°C)
Indoor Humidity Range	10% to 99%
Outdoor Humidity Range	10% to 99%
Wind Direction	0° to 360°
UV Index Range	0 to 15
Console Display	Color
Sensors Included	Temperature, Humidity, Wind Speed, Wind Direction, Rainfall, UV, Solar Radiation
Power Source (Sensor Array)	Solar Panel with Battery Backup
Outdoor Sensor Range	Up to 330 feet (100 meters)
Transmission Range	Up to 330 ft (100 m) line of sight
Update Rate	16 seconds
Data Update Interval	16 seconds
Outdoor Temperature Range	-40°F to 140°F (-40°C to 60°C)
Rainfall Accuracy	+/- 5%
Rainfall Range	0 to 393.7 inches (0 to 9999 mm)
Wind Speed Range	0 to 100 mph (0 to 160 km/h)
Solar Radiation Range	0 to 1800 W/m²