Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 22
Figure 22
Press the up or down button to scroll to the parameter you wish to clear. Press the
button to check the parameter you wish to clear. Once checked, press the Enter Key .
To confirm the selection, press and . The high and low will be reset for the checked
parameters.
Press the Return Key to return to the main screen.
Refer to Factory 6.10 to clear all of the highs and lows at Midnight, or manually clearing all of the
highs and lows at once.
6.6.2 Archive Memory Mode
You can view and clear archived memory from the Archive Memory Mode.
To Next Page
Loading...
