Version 2.12 ©Copyright 2020, Ambient LLC. All Rights Reserved. Page 13
Figure 11
5. Insert two AA batteries.
6. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 12.
Figure 12
(1) temperature
(2) temperature units (°F vs. °C)
(3) channel number
(4) relative humidity
7. Close the battery door.
8. Repeat for the additional remote transmitters, verifying each remote is on a different channel.
5.8 PM2.5 Air Quality Sensor
The WS-2000 supports one indoor and one outdoor PM2.5 Air Quality sensor. For more information,
please visit:
https://help.ambientweather.net/product/pm25
To Next Page
Loading...
