xii | Model 5100 HD Analyzer
EC Declaration of Conformity
Manufacturer’s Name: AMETEK, Inc., Process Instruments
Manufacturer’s Address: Process & Analytical Instruments Division
150 Freeport Road
Pittsburgh, PA, 15238 USA
Phone: 412-828-9040 Fax: 412-826-0686
declares that the product:
Product Name: Model 5100 HD Analyzer (General purpose version)
Conforms to the following directives:
EMC Directive 2004/108/EC using the following standards:
EN 61326-1 Radio Frequency Emissions
EN50011 (CISPR 11) Radiated and Conducted, Class A, Group 2, ISM Device
EN61000-3-2 Harmonic Current Emissions
EN61000-3-3 Voltage Fluctuation / Flicker
EN61326-1 Immunity
EN61000-4-2 Electrostatic Discharge, 4kV/8kV, contact/air
EN61000-4-3 Radiated Radio Frequencies, 80MHz-1GHz 10V/m, 1.4-
2.0GHz 3V/m, 2.0-2.7GHz 1V/m
EN61000-4-4 Electrical Fast Transient/Burst, 1kV/2kV
EN61000-4-5 Surge, 1kV to Shields, 1kV/2kV AC Dierential/Common
EN61000-4-6 Conducted Radio Frequencies, 3 V/rms
EN61000-4-8 Magnetic Immunity 30A/m
EN61000-4-11 Voltage Dips and Variations, 100%, 95%, 60% and 30%
Pressure Equipment Directive 97/23/EC:
Article 3, Paragraph 3
ATEX Directive 94/9/EC using the following standards:
EN60079-0 Explosive atmospheres - Part 0: Equipment - General requirements
EN60079-11 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety “i”
EN60079-15 Explosive atmospheres - Part 15: Equipment protection by type of protection “n”
EN60079-28 Explosive atmospheres - Part 28: Protection of equipment and transmission
systems using optical radiation
Manufacturer’s Address in Europe:
AMETEK GmbH
Rudolf-Diesel-Strasse 16
D-40670 Meerbusch Germany
Contact: Dr. Jurgen Gassen
__________________________________________
Robert J. Fiore
Manager of New Product Development
AMETEK Process & Analytical Instruments Division
2010
To Next Page
Loading...
