Ametek 5100 HD - Settings: Configuration; Ethernet

Web Interface | 5-13
Settings: Conguration
Use the Conguration display window to identify system and communication
settings.
Ethernet
• DHCP (Dynamic Host Conguration Protocol ) Enabled
IP address is obtained from a DHCP server on the network. If no DHCP
server is found, it defaults to 169.254.1.1
• IP Address
Cannot be modied when DHCP is checked. When DHCP is not checked a
static IP address can be assigned.
• IP Subnet Mask
Denes the subnet to which the analyzer belongs. You can communicate with
devices in the same Subnet locally without going through a router.
• Gateway or “Router” (optional)
Allows local network trac to be sent to another network. Setup this
parameter only if communicating from outside the internal network.
• MAC (Media Access Control) Address
Identies your computer’s unique physical address. This is a unique ID
assigned at the factory.