Ametek 5100 HD - Network; Dhcp; IP Address; Subnet

User Interface | 4-13
Network
The Network Key enables the Model 5100 HD Analyzer to communicate over an
Ethernet network to view data, diagnostics, or backing up/restoring the analyzer
conguration.
NETWORK
DHCP*
IP ADDRESS*
GATEWAY*
SUBNET*
Enable
Disable
NETWORK*
Enable
Disable
Menu for the Network key.
Network
Enables or disables the Ethernet network. Select Enable or Disable.
DHCP
Dynamic Host Conguration Protocol (DHCP). Choose Enable to open the com-
munication protocol or Close to disable it.
IP Address
Denes the network of the analyzer and is a required parameter. Enter the IP ad-
dress for your network.
Subnet
Denes the subnet to which the analyzer belongs. Analyzers in the same subnet
can communicate locally without going through a router (Gateway). Enter your
network subnet.
Gateway
This function denes the Gateway IP address for the network to allow local net-
work trac to be sent to another network. Enter the Gateway address.