Ametek 5100 HD - Concentration; Data Valid; System Alarm; Test

User Interface | 4-7
Concentration
Select this alarm function to set the limits for the concentration.
• High Limit
Select and then enter the value for the High Limit for the Concentration
alarm.
• Low Limit
Select and then enter the value for the Low Limit for the Concentration
alarm.
Data Valid
Select this alarm function to set the alarm to recognize corrupt data.
System Alarm
Select this function to trigger an alarm when the system malfunctions.
Test
Select this function to test the relay alarm settings.
NO/NC
Select this function to dene the default relay position.
• NC = Normally Closed
• NO = Normally Open