Ametek 5100 HD - User Interface; Overview of Keypad; Navigation Keys

Installation & Start-Up | 3-19
User Interface
Overview of Keypad
The Model 5100 HD keypad is used to access
menus, sub-menus and system values, and to
set-up analyzer parameters.
Press ENTER to access the menus.
CALIB Used to dene on-demand calibration settings.
ALARM Used to dene alarm output settings.
ANALOG RANGE Used to scale the 4 to 20 mA output in
proportion to the moisture concentration.
TEST CONFIG Used to dene device and communication
settings.
Navigation Keys
BKSP Used to reverse navigate.
ENTER Used to select or to conrm an entry.
SPACE Used to enter “-” (minus) for negative numbers.
Arrow Keys Scroll up, down, left, and right through menu
items and system value lists.
Number Keys (0 through 9) Enter values. Use the period (.) to enter numbers
that require a decimal point.
To select an item, use the arrow keys to scroll through the menu items until the
small arrowheads point to your choice as shown below. When you come to the
end of the selections under that menu item, the display will go back to the top of
the list.