M470039-01 REV-F Page 150
7) MANIFOLD-4U / External piping kit installation for PLW.
AMREL standalone 4U height Water-cooled eLoad unit is supplied with a coolant
distribution kit. Due to the different cooling system requirements, the external piping kit is
designed to convert two 3/8” NPT into one ½” NPT. To properly install the coolant
distribution kit, please refer to the following directions carefully.
Components included:
1) FLUID INLET distribution pipe x 1pcs
2) INLET TOP interconnect pipe x 1pcs
3) INLET BOTTOM interconnect pipe x 1pcs
4) FLUID OUTLET distribution pipe x 1pcs
5) OUTLET TOP interconnect pipe x 1pcs
To Next Page
Loading...