Features and Specifications Sorensen DCS Series 1kW and 1.2kW Supplies
1-2 M362500-01 Rev K
•
Automatic mode crossover into current or voltage mode.
•
Ten turn potentiometer voltage and current controls permit high resolution setting of
the output voltage and current from zero to the rated output.
•
Flexible output configuration: multiple units can be connected in parallel or series to
provide increased current or voltage.
•
High frequency switching technology allows high power density, providing increased
power output in a small, light package.
•
Remote sensing to compensate for losses in power leads.
•
Adjustable Over-Voltage Protection (OVP)
•
External TTL, AC or DC shutdown
•
Remote voltage, resistive, current limit and OVP programming with selectable
programming constants.
•
External indicator signals for remote monitoring of OVP status, local/remote
programming status, thermal shutdown, and output voltage and current.
•
Optional IEEE-488 interface for complete remote programming and readback
capability.
To Next Page
Loading...
Need help?
General
