5 Press [MENU] key to draw back from the “Parental
Lock” menu.
11.3 Time Setting
When you enter “Local Time Setting” menu, you will see
the screen like below:
GMT Usage: This item is for the usage of GMT. You
can press [left/right] keys to switch “On/Off”.
The “GMT Offset” item is valid only when the setting
“GMT Usage” is “ON”. You can press [Volume Up /
Volume Down] keys to switch “GMT Offset” value,
and the range is “-12:00 ~ +12:00”, increase each
half hour progressively.
You can press [left/right] to control Summer time on
or off.
“Date” and “Time” items are valid only when the
setting “GMT Usage” is “OFF”. You can press
[Volume Up / Volume Down] keys to move highlight
and use numeric keys to input directly.
If the current channel provides the correct time
information, you will see the current time while you
enter “Time” menu. If the current channel doesn’t
provide time information, you will have to input the
date and time information manually.
Time Display can control time display on or off when
full screen play
Press [MENU] key to draw back from “Local Time
Setting” Menu.
11.4 Timer
Press [enter] key to open timer menu.
Current time information will display on the first
column; if the current time is incorrect, please modify
the time information in “Time” item.
Timer Number: You can press [left/right] keys to set
Timer number, and there are 8 timers in total.
Timer Mode: There are several modes for
Timer setting, including Off, Once, Daily, Weekly,
Monthly , Monthly to Friday and Satday to Sunday.
Timer Service: There are three options for “Timer
Service”, including “TV Channel” and “Radio
Channel” (timer setting for channel change and
Wakeup/Sleep) and "Record Radio" and "Record
TV" (Timer setting for Record TV or Radio program
to USB Hard Disk) and Message (reminding
message).
When you select “Channel” (timer setting for channel
change and Wakeup/Sleep) option in “Timer
Service”, the screen will display like below:
i. Channel: ress [OK] key to enter channel
list and select channel that you want
setting.
ii. Date: use numeric keys to input your
wakeup date.
iii. On Time: use numeric keys to input your
wakeup time. Once the time’s up, no matter
what the system is in standby mode or in
playing mode, the system will automatically
switch to the channel you want and start to
play.
iv. Duration: After you set a time for “Duration”
item, once the time’s up, the system will
automatically switch to standby mode. If
you do not want this function to work, set
the duration to 00:00.
v. Standby After Finish:You can press
To Next Page
Loading...