2 After input each character, the program list on
the left will search the channel according to
your input and list the matched channel.
3 Move highlight to “OK” and press [OK] key to
close “Find” window and you can select
channel from the channels list directly.
8.20 Zoom
1 The [ZOOM] key allows you to magnify a certain
area on the images
2 Press [ZOOM] key again, the image will enlarge by
x1, x2, x4, x6, x8, x12, x16.
3 In “x2 ~ x16” image, use [Up/ Down/ left/ right]
key to move the image center area you want to
see.
4 In zoom mode, press [Exit] to close “Zoom”
window.
8.21 Menu
Press [MENU] key to open the menu, exit the current
menu to previous menu or close the window.
8.22 Video Format
1 Press [P/N] (white) key under Full Screen playback
for 1st, it will show the current system output video
resolution, continuously press this key & system
will switch its output video resolution by sequence
“Auto->480i-> 480P-> 576i-> 576p->
720P-50>720P-60>1080i-50>1080i-60>1080p-50
>1080p-60”.
8.23 Exit
Press [EXIT] key to exit the current menu to previous
menu or close the window.
9. Service
When you press [Menu] key to enter menu, there will
display the picture like below:
1 Press [Up/Down] key, you can select the submenu
Organizing services and Organizing favorites. If
Menu Lock is “On”, it will display a dialogue box for
user to input password. The default Password is
“0000”.
2 Press [OK] key to enter the “Organizing Service”.
Press [Menu] key to go back to main menu.
9.1 Organizing Service
When you enter “Organizing Service” menu, there will
display the screen like below.
1 You can move highlight by pressing [Channel
Up/Channel Down] key and [OK] key to select
the programs which you want to edit.
2 You can press [P+/P-] key to implement the
Page Up/Page Down function.
3 You can use [Red] key to switch different
Group.
4 You can press [Green] key to select the
programs by different select mode.
To Next Page
Loading...