4 Press [Exit] key to exit the current window.
? Frequently Asked Question
Q: Why does the screen display “No Favorite
Channel”, after pressing [Favorite] key?
A: It is because you haven’t set any channels as
“favorite channel”. Please refer to Favorite
.
8.10 Audio
1 In full screen, press [AUDIO] key to open the
“Audio” window on the screen.
2 You can modify the audio track by pressing
[Channel Up / Channel Down] key and modify the
audio mode by pressing [Volume Up / Volume
Down] key.
3 Mode: Left/Right/Stereo/Mono
8.11 Information
In full screen, press [INFO] key (press [INFO] key and
[RED] key) to open information screen, the window
shows the parameters of current channel.
8.12 EPG
1 The STB has an Electronic Program Guide (EPG)
to help you navigate channels through all the
possible viewing options. The EPG supplies
information such as channel listings and
starting/ending times for all available channels.
2 Press [EPG] key to display EPG screen.
3 Press [Red] key to select the channels by different
group, such as by Favorite/Satellite/Provider/CAS
etc.
4 Press [Green] key to select different display modes
among Now EPG, Next EPG, More and Schedule,
like the following picture:
To Next Page
Loading...