CONNEX
TM
User Guide
25
Air Unit Antenna Mounting Accessories
The Air Unit antenna mounting accessories provide a variety of options for attaching
the two provided flat cable antennas to the aircraft so that they are pointing the
towards the ground (vertical).
Figure 26: Air Unit Cable Antenna Mounting Accessory – With Flat Cable Antenna – Box 2
Figure 27: Front and Back of the Antenna Mount Piece
This Antenna Clamp attaches to the rotary on the Antenna Mount Piece (shown above)
using the provided screw. The Antenna Clamp has two holes through which you can
insert the screw to attach it to the Antenna Mount Piece according to the direction you
would like the antenna to point. Once the Antenna Clamp is connected to the Antenna
Mount you can rotate it in the direction that you require the antenna to point, as
shown below:
Figure 28: Rotating the Antenna Clamp versus the Antenna Mount Piece
Antenna Mounting Piece
Antenna Clamp
To Next Page
Loading...