Amped Wireless TAP-EX - Troubleshooting USB Storage and Other Issues

TAP-EX
USER’S GUIDE
87
87
c. Reset the Range Extender back to default settings and try the Wizard again. To reset the Range Extender
back to default settings, push the Reset Button (on the side panel) for five (5) to ten (10) seconds then
let go. After the Range Extender has fully reset, use an Ethernet cable (not included) and connect to the
Range Extender. Login to the Web Menu at http://setup.ampedwireless.com and run through the
Wizard.