Troubleshooting: USB Storage & Other Miscellaneous Issues
I cannot access my USB storage device after I plug it into the Range Extender.
Follow the instructions below for your operating system.
Windows 7 & Vista
To access the drive from your Windows desktop:
Note: If the USB drive does not appear automatically under your Networked devices (Windows 7, Vista or Mac OS X), you will need to
Map the Network Drive.
a. Click the Start button.
b. Click Computer.
c. On the Computer page, the drive should appear on the left hand column under Network as
AMPED_RE_USB.
To Map the Network Drive:
a. Click the Start button.
b. Click Computer.
c. Click Map Network Drive from the top bar.
d. Select a drive letter (any), then enter in the folder field:
\\AMPED_RE_USB or \\shared disk IP address
e. If the drive fails to open, click browse and locate AMPED_RE_USB under Network.
To Next Page
Loading...
