EasyManua.ls Logo

Amped Wireless TAP-R2 - Page 31

Amped Wireless TAP-R2
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TAP-R2
USER’S GUIDE
30
If for some reason you do not get an IP address and you know that your Internet provider uses DHCP, try
resetting your modem. Remove the power adapter from the modem as well as the backup battery (if
available). Wait about 30 seconds and then power the modem back on. You can run through the Basic Setup
Wizard again to see if that fixes your Internet connection issues.
Setups Requiring a Login: If you have an Internet connection that requires you to enter a login to access the
Internet through the modem, select this option. DSL connections sometimes use this method. The different
types of DSL connections are listed below.
PPPoE connections normally requires login information. If you do not know the settings for your PPPoE
connection, please contact your Internet provider.
PPTP and L2TP connections requires login information as well as IP address settings. If you do not know the
settings for your PPTP / L2TP connection, please contact your Internet provider.

Table of Contents

Other manuals for Amped Wireless TAP-R2