Need help?Do you have a question about the AMPLIFIED ENGINEERING fatbox G3 and is the answer not in the manual?
General| Brand | AMPLIFIED ENGINEERING |
|---|---|
| Model | fatbox G3 |
| Category | Gateway |
| Language | English |
All specialist electronic devices must be operated with due care by trained personnel to avoid damage or injuries.
Inadequate current/voltage can prevent data service connection. Over 30 VDC will damage the device.
Never remove or insert SIM card when PWR is ON. Damage to device/SIM will not be warranted.
Do not reboot/power-down the device until the writing process is acknowledged as completed.
Steps to dismantle, insert micro SIM card, lock latch, and reassemble the casing.
3G Data Enabled micro SIM Card, PC/Laptop with Ethernet, operator's SIM details.
Launch browser, enter 192.168.1.1. Default login: admin/fatbox12345.
Prompted to change default username/password after first successful login.
Configure LAN IP, Netmask, APN, User Name, Password, SIM PIN for 3G/4G Internet.
Configure IP address, Netmask, DHCP enable, start, and limit for LAN ports.
Set WiFi mode, SSID, Password, and IP Address for WiFi backhaul.
Set APN, Dial Number, User Name, Password, PIN, Service, DNS, PPP Keepalive for SIM1/SIM2.
Set Serial Port Mode (RS-232), Speed, Data Bits, Parity, Stop Bits.
Enable/disable TCP transport, set Mode (Server/Client), Server IP, Listening Port.
Set Modbus, CAN bus, Zigbee modes. Configure Event Drop Type, Poll Period, Timeout, Pause.
Configure Deviceld, Enable Client, Message Type for Azure IoT Hub.
Configure Device Token, Device Name for Ubidots IoT.
Configure Thing Name, Topic, AWS Endpoint, AWS Port for AWS IoT.
To Next Page