Amtech Axpert-Eazy Series - Page 237

Axpert-Eazy AC Variable Frequency Drive
A.21
13
A
Sr.
No
Control
Version
Changes
Compatible
display
version
Effective
date
20, B606 is 0.8sec, B607 is 100% and C505 is
70%.
- Changed Max value of parameters
A601~A608 are 20, B605 is 100, C201~C204
are 15, C401 is 6 and C506 is 30sec.
- When STOP key is pressed for 2.5 seconds or
longer during operation, the drive will coast to
stop regardless of Local or Terminal start
control.
5 7.09 - Added new parameters M218, M219, B118,
C315, C316, C223 and A310.
- Changed default value of B109, B612, B702,
C205~C218 and C221~C222. Also default
value updated of A501 as per model and
motor parameters
- Changed minimum value of A101, A102,
A104, A306, A405~A407, B401~B407,
B501~B503, C616, D201~D202 and D303.
- Changed maximum value of C214 and C218.
- Added function 35: FAN Control and 36:
Ready1 in all PSO. Added 37: Ready1 F/B,
38: Forward Run, 39: Reverse Run, 40:
Forward Jog and 41: Reverse Jog in all PSI.
- Frequency change rate changed from Normal
screen.
- Hot start and Cold start overload curve added.
- Differentiated temperature fault
- PLC options added in parameters A110, A111
and A112.
- Add AMP and kW unit in parameter C614.
- “Parameters lock” screen displayed when
parameters are locked. “Control Version Not
Compatible” screen displayed when version is
not compatible during paste operation.
- Added Time-out in MODBUS protocol.
- Resolution changed in PLC analog output
instruction.
- Added rotational auto-tuning in B201.
7.09 01/03/2014
6 7.10 - Added new parameters M220, M221, M621 ~
M624, M711 ~ M715, B119, B317 ~ B324,
B616 ~ B627, B711, B712, B801 ~ B816,
C317 ~ C324.
- Changed minimum value of B104, B604 and
D103.
- Changed maximum value of B108.
- Changed default value of B604, B606, B612.
- Added 26 and 42 options in PSI.
- Added 37 ~ 40 options in PSO, more units in
C614.
- Added extended rotational auto-tuning option
(B201:4).
- Differentiated individual phase current sensor
fail fault.
- Added faults like Thermistor short, Thermostat
not connected (NC), Brake related fault and
Panel temperature fault.
- Timed Over Current fault changed to Drive
7.10 07/06/2017