Amulet Hotkey K4u+ - Mouse Point Registry Values

www.amulethotkey.com | 15
Amulet Hotkey K4u
+
Manual
3 Within this registry key, set the following values to Yes:
usbStatusUploadDisabled=Yes
Disables the Read Switch Status via USB menu item.
usbPackageDownloadDisabled=Yes
Disables the Update Switch Firmware and FPGA via USB
menu item.
Note: Set these values to No to re-enable the menu items.
5. 6 Mouse Point registry values
The Mouse Point installer creates the following registry values
on the host PC.
Note: Administrator permissions are needed to modify these
registry values.
5.6.1 Firmware updates and monitoring
Locate the following registry key:
HKLM\SOFTWARE\Amulet Hotkey\USB updating config
Within this key, the following registry values configure Mouse
Point operations, including firmware updates.
enableScheduledUpdates=Yes or No
Defaults to No. Specifies whether scheduled firmware
updates are enabled. If this registry value is set to Yes,
Mouse Point runs a daily scheduled update at the time
specified by ScheduledUpdateTime. See section 8. 4.
forceFocusForUpdates=Yes or No
Defaults to No. Specifies whether to force the K4u
+
to switch
channels to the Mouse Point host computer before running a
scheduled firmware update. See section 8. 4.
oneShotUpdateFilename=<file name>
Specifies the full UNC path and file name of the firmware
package for the next one-shot firmware update. For
example:
\\UNX-NY-01\Amulet Hotkey\Test\k4u0P333.pkg
One-shot firmware updates are described in section 8. 3.
remoteLogFilePath=<file path>
Specifies specifies a UNC path to the remote folder where
you want to save K4u
+
log files. For example:
\\UNX-NY-01\AmuletHotkey\switches\logs
Log files are described in section 6. 7.
remoteUpdatePath=<file path>
Specifies the full UNC path of the folder containing the
package file for scheduled firmware updates. For example:
\\UNX-NY-01\Amulet Hotkey\Switch Firmware
See section 8. 4 for details.
scheduledUpdateTime=<time>
Specifies the time (in 24 hour format) for scheduled
firmware updates. Leading zeroes for hours and a colon
separator between hours and minutes are both optional.
Valid examples are 01:45, 1:45, 0145 and 145.
See section 8. 4 for details.
usbPackageDownloadDisabled=Yes or No
Defaults to No. Specifies whether to disable the Update
Switch Firmware and FPGA via USB item in the Mouse Point
menu. See section 5. 5 for details.
usbStatusUploadDisabled=Yes or No
Defaults to No. Specifies whether to disable the Read
Switch Status via USB item in the Mouse Point menu.
See section 5. 5 for details.
5.6.2 Firmware update results
Locate the following registry key:
HKLM\SOFTWARE\Amulet Hotkey\USB updating results
Within this key, the following registry values indicate the results
of the recent firmware updates.
OneShotUpdateResult=<result>
Indicates the result of the most recent one-shot firmware
update. You also use this registry value to trigger a firmware
update. Possible values are:
0 No firmware update performed yet
1 Triggers a one-shot firmware update. See section 8. 3
for details.
2 Firmware update not needed
3 Firmware update successful
4 Firmware update failed
5 User cancelled firmware update before it started
scheduledUpdateResult=<result>
Indicates the result of the last scheduled firmware update.
Possible values are:
0 No firmware update performed yet
2 Firmware update not needed
3 Firmware update successful
4 Firmware update failed
5 User cancelled firmware update before it started