Amulet Hotkey K4u+ - Page 7

www.amulethotkey.com | 7
Amulet Hotkey K4u
+
Manual
7 Power socket
Use this socket to connect power to the K4u
+
. This is a DC
inlet and relies on a supply from the PSU (CA-XX01-0002)
packaged with the product. This power supply is auto-
sensing and provided with an appropriate IEC lead for the
region.
Important! Use only this PSU with the K4u
+
.
8 Power cable clip
A clip is provided to help secure the power supply cable to
the K4u
+
if necessary.
6 Feature connector
This socket supports the following features:
● K4 Controller (CA-HKCT-0004)
The K4 Controller provides an alternative method for
changing channels. It comprises four illuminated
push-buttons in a compact case that can be placed next to
a keyboard. It allows you to locate the K4u
+
out of reach
under a desk while still being able to see which channel
has focus.
K4 Controller
● Focus indicator LEDs (CL-HK04-0001)
The K4u
+
is a keyboard and mouse switch; it does not
switch video. Screens for each attached computer remain
connected directly to the associated computer.
Focus indicator LEDs show which screen is currently the
focus of keyboard and mouse activity. The focus indicator
attaches to a screen and illuminates when the associated
computer is being used:
LEDs identify the computer and screen currently being
addressed by the keyboard and mouse.
Note: Focus indicator LEDs are only available to special
order. Four LEDs are combined in a single pack.
Minimum quantities apply.
● Sharing indicator LEDs
When a computer is shared between two K4u+ switches,
sharing LEDs can indicate to both users the status of the
shared channel. See section 7.7.2 for details.
Note: You cannot use sharing LEDs and focus LEDs
together. Because both LEDs plug into the Feature
Connector port, the K4u+ can only support one set of LEDs
at a time.