AMX NXA-WAP250G - Access Point Mode - Roaming

Initial Configuration
10
NXA-WAP250G 802.11b/g Wireless Access Point
Access Point Mode - Roaming
A wireless network can also support roaming for mobile users (FIG. 2). Multiple NXA-WAP250Gs can
be placed so that a continuous coverage area is created. Wireless users within this area can move freely
and remain connected to the network. All NXA-WAP250Gs and wireless stations in the network must be
configured with the same SSID. Neighboring NXA-WAP250Gs should be set to non-interfering radio
channels (that is, channels 1, 6, or 11 for 802.11b/g).
FIG. 2 Access Point Mode - roaming for mobile users
NetLinx Central Controller
NXA-ENET24 Switch
NXA-WAP250G
A/V Rack
Video display
monitor
NXA-ENET24 Switch
NXA-WAP250G
MVP Wireless
Touch Panel
<BSS1>
<BSS2>
<ESS>