AMX NXA-WAP250G - System Setting; System Setting - Administration

System Configuration
29
NXA-WAP250G 802.11b/g Wireless Access Point
System Setting
The System Settings pages allow you to change the management access password, specify the operation
mode, enable/disable VAP management, and restart the WAP-250G (FIG. 24).
System Setting - Administration
Management access to the WAP-250G is controlled through a single password. Use the options on the
Administration Settings page (FIG. 25) to change the user name and password for web interface access.
To protect access to the management interface, you need to configure an Administrator password as soon
as possible. If the password is not configured, then anyone having access to the WAP-250G may be able
to compromise WAP-250G and network security.
FIG. 24 System Setting page
FIG. 25 System Settings - Administration Settings