System Configuration
23
NXA-WAP250G 802.11b/g Wireless Access Point
System Configuration
The NXA-WAP250G’s basic settings can be configured using the Setup Wizard, as described in the
Initial Configuration section on page 9.
However, for some installations, you may need to configure specific settings that are not available in the
Setup Wizard. The Advanced Setup menu provides access to all the unit’s settings for complete control
of the WAP-250G’s features.
To access the Advanced Setup menus, follow these steps:
1. Login to the web interface (see the Logging into the Web Interface section on page 12).
2. When the Home page opens, select Advanced Setup. The Welcome to AMX AP Advanced Setup
page displays (FIG. 18).
The information in this chapter is organized to reflect the structure of the web management screens for
easy reference. However, it is recommended that you first configure a password to control access to the
management interface. For details, see the System Setting - Administration section on page 29.
FIG. 18 Advanced Setup
To Next Page
Loading...