System Configuration
48
NXA-WAP250G 802.11b/g Wireless Access Point
Upgrade via a Remote Server
The Remote File page allows you to download a new software code file from a remote server to the
WAP-250G using FTP (FIG. 45) or TFTP (FIG. 46).
FIG. 46 Firmware Upgrade - Remote File (TFTP)
When using an FTP or TFTP server, be sure to first obtain the IP address of the server and note the
correct file path where the WAP-250G software is stored. If upgrading from an FTP server, also make
sure that you have a user account configured on the server with a user name and password.
FIG. 45 Firmware Upgrade - Remote File (FTP)
To Next Page
Loading...