AMX NXA-WAP250G - System Setting - VAP Management; System Settings - Reboot System

System Configuration
32
NXA-WAP250G 802.11b/g Wireless Access Point
System Setting - VAP Management
The VAP Management page allows you to enable VAP management (FIG. 28).
When VAP management is enabled, it tags traffic from VAP#1 as high priority and traffic from VAP#2 as
low priority.
System Settings - Reboot System
The Reset System page (FIG. 29) allows you to restart the WAP-250G software and restore factory
default settings.
FIG. 28 System Settings - VAP Management
This setting is only available when the Operation Mode is set to AP.
FIG. 29 System Settings - Reset System