Initial Configuration
19
NXA-WAP250G 802.11b/g Wireless Access Point
Click Next to proceed.
Step 4: Wireless VAP #2 Setting
The options on this page allow you to set the wireless Service Set Identifier (SSID) and wireless security
encryption key for the VAP#2 wireless network (FIG. 15).
Enter the SSID, or wireless network name, which all wireless stations must use to associate with the
NXA-WAP250G. The SSID is case sensitive and can consist of up to 32 alphanumeric characters
(Default: Wireless Network - 2).
FIG. 14 Setup Wizard - Wireless VAP #1 Setting (WPA-PSK settings)
All wireless devices must be configured with the same WEP or WPA-PSK Key values
to communicate with the NXA-WAP250G.
FIG. 15 Setup Wizard - Wireless VAP #2 Setting
Wireless VAP #2 Setting is only available when the Operation Mode is set to AP (see
FIG. 6 on page 13).
To Next Page
Loading...