System Configuration
42
NXA-WAP250G 802.11b/g Wireless Access Point
Network Settings - PPPoE Setting
Many Internet service providers (ISPs) use the Point-to-Point Protocol over Ethernet (PPPoE) to
automatically assign an IP address to users with a DSL modem. The PPPoE page provides the settings
needed for this service (FIG. 38).
The items on this page include:
PPPoE Setting: Enables the WAP-250G IP address to be assigned automatically from an
Internet service provider (ISP) through an ADSL modem using PPPoE.
Username: If your ISP has provided you with a PPPoE user name, enter it in the
corresponding text box.
Password: If your ISP has provided you with a PPPoE password, enter it in the corresponding
text box.
FIG. 38 Network Settings - PPPoE Settings
To Next Page
Loading...