Initial Configuration
20
NXA-WAP250G 802.11b/g Wireless Access Point
The options for Wireless VAP #2 Settings are identical to those presented on the Wireless VAP #1
Setting page (see the Step 3: Wireless VAP #1 Setting section on page 16).
Click Next to proceed.
Finish and Reboot
1.
Click Finish (FIG. 16).
2. Click the Reboot button to restart the NXA-WAP250G (FIG. 17).
Both SSIDs (VAP#1 and VAP#2) must use the same encryption method.
All wireless devices must be configured with the same WEP or WPA-PSK Key values
to communicate with the NXA-WAP250G.
FIG. 16 Setup Wizard - Wizard configuration done
FIG. 17 System is Rebooting
To Next Page
Loading...