System Configuration
49
NXA-WAP250G 802.11b/g Wireless Access Point
The items on this page include:
New firmware file: Specifies the name of the code file on the server. A path on the server can
be specified using “/” in the destination file name, providing the path already exists. Other
than to indicate a path, the file name must not contain any slashes (\ or /), the leading letter
cannot be a period (.), and the maximum length for file names on the FTP/TFTP server is 255
characters or 32 characters for files on the WAP-250G. (Valid characters: A-Z, a-z, 0-9, “.”, “-
”, “_”)
IP Address: IP address or host name of the FTP or TFTP server.
Username: The user ID used for login to an FTP server.
Password: The password used for login to an FTP server.
Start Upgrade: Starts the download process. Be sure to allow enough time for the download
to complete before rebooting the WAP-250G.
When you have downloaded the software file, you must reboot the WAP-250G to
implement the new code.
To Next Page
Loading...