EVAL-ADuCM355QSPZ Evaluation Board
UG-1308
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluating the ADuCM355 Precision Analog Microcontroller
with Chemical Sensor Interface
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 24
FEATURES
Debug and programming capability of the ADuCM355
Evaluation capability with electrochemical gas sensors
ADT7420 ±0.25°C accurate temperature sensor via I
2
C
MicroUSB power option and connection to PC
EQUIPMENT NEEDED
PC running Windows® 7 or later
Electrochemical gas sensor or resistor star network
DOCUMENTS NEEDED
ADuCM355 hardware reference manual
ADuCM355 data sheet
SOFTWARE NEEDED
IAR Embedded Workbench or Keil μVision
ADuCM355 GitHub Repository
Terminal program such as RealTerm
GENERAL DESCRIPTION
The ADuCM355 on-chip system provides the features needed
to bias and to measure a range of different electrochemical
sensors. The EVAL-ADuCM355QSPZ allows users to evaluate
the performance of the ADuCM355 when implementing a
range of different electrochemical techniques, including
chronoamperometry, voltammetry, and electrochemical
impedance spectroscopy (EIS).
Complete specifications for the ADuCM355 are available in the
ADuCM355 data sheet, which must be consulted in conjunction
with this user guide when using the EVAL-ADuCM355QSPZ.
EVALUATION BOARD PHOTOGRAPH
16887-001
Figure 1.
To Next Page
Need help?
General
