6
First-Time User Checklist (Continued)
For your safety, and to prevent damage to the machine, please verify the following:
9. DRO arm and DRO are securely
mounted to the machine.
Yes/No
10. The DRO Input-voltage switch
on the power-entry module
(back panel) is set to the correct
input voltage.
Yes/No
11. DRO is properly grounded.
(Earth-ground to wall conduit or
water pipe, for example, not
grounded to the machine).
Yes/No
12. All cables are off the floor and
out of the range of moving parts.
Yes/No
To Next Page
Loading...