42
Display Dim OFF/ON – F 22/F 23
F 22 allows you to activate Dim Mode; F 23 allows you to deactivate Dim Mode. To
increase the life of the display, the DRO automatically dims if it is not used for 15
minutes (similar to a computer terminal’s screen-saver mode). When you activate Dim
Mode the axis displays show blinking decimal points. The DRO remains in Dim Mode
until you press a key or move one or more linear encoders. (Default: ON)
1. Press to select DIM ON.
Display in axis window
appears, if available.
2. Press
to select DIM OFF.
Display in axis window
appears, if available.
NOTE: You can disable this feature, however the DRO still goes into Dim Mode after
standing idle for one hour.
To Next Page
Loading...