Anilam Wizard 211 - Last Position Save;Recall - F 10;F 11

32
Last Position Save/Recall – F 10/F 11
F 10 allows you to save the machine’s last position before turning OFF the machine;
F 11 allows you to recall the saved position after turning ON the machine.
IMPORTANT: Lock all axes of machine movement first.
To select the feature and save the last position:
1. Press
2. Turn OFF the DRO power.
To recall the saved position:
1. Turn ON the DRO power.
2. Press
to select the feature and
recall the last machine
position to the display.
3. Unlock the machine and continue with the job.
NOTE:
This feature stores display information only. It does not track table movement
when power is turned OFF.