Anilam Wizard 211 - Recalling a Preset Dimension

13
Recalling a Preset Dimension
This feature allows you to recall a preset dimension to the axis display.
Use this feature when making multiple moves of the same dimension.
NOTE: This feature works only in Incremental Mode.
To recall a preset dimension:
1. Press
ABS
INCR
to set the display
to Incremental
Mode.
2. Press the desired axis keys to select the axes.
3. Enter the incremental dimension.
4. Move the machine to zero.
5. Press the desired axis key twice to recall the dimension
.
NOTE: You can recall a dimension after resetting absolute zero or in case of power
loss.
To clear a preset dimension while in Incremental Mode:
1. Press the desired axis keys to select the axes.
2. Press
to set the display
to Incremental
Mode.