Anker SOLIX X1 - Page 73

70
GridPower Sensor
RS485
Backup Loads
Anker SOLIX X1
Environmental Requirements
·
Do not expose the equipment to flammable or explosive gas or smoke. Do not perform any operation on the equipment in
such environments.
·
Do not store any flammable or explosive materials near the equipment.
·
Install the equipment in an area far away from liquids and in a well ventilated environment.
·
Do not install equipment in living spaces or habitable areas of dwelling units, such as living rooms.
·
Natural disasters, such as floods, debris flows, earthquakes, and typhoons, can cause damage to equipment due to force
majeure.
·
To prevent fire due to high temperature, ensure that the ventilation vents or heat dissipation system are not blocked when
the equipment is running.
Mechanical Safety
·
Do not drill holes into the equipment.
·
Wear goggles and protective gloves when drilling holes.
·
When moving the equipment by hand, wear protective gloves to prevent injuries.
·
Clean up any debris that may have accumulated within or around the equipment after drilling.
·
Be cautious to avoid injury when moving heavy objects.
Commissioning
When the equipment is powered on for the first time, ensure that professional personnel set parameters correctly. Incorrect
settings may result in inconsistency with local certification and aect the normal operation of the equipment.
Maintenance and Replacement
Disconnect all sources of supply before servicing.
Replace only with the same ratings and type of fuse.
Disconnect supply before changing fuse.
Only certified professionals are allowed to install and maintain the battery and external power
supplies. Establish secure earth connections to mitigate high touch current before connecting to the
power supply.
·
High voltage generated by the equipment during operation may cause an electric shock, which could result in death, serious
injury, or serious property damage.
·
Prior to maintenance, power o the equipment and strictly comply with the safety precautions in this user guide and
relevant documents.
·
After powering o the equipment, wait at least 6 minutes before disassembling any cables or components.
·
Maintain the equipment with proper tools, testing equipment, and sucient knowledge of this document.
·
Turn o the equipment switches when maintaining the electric devices or power distribution devices connected to the
equipment.