1. About This Guide
1.1 Purpose
1.2 Intended Audience
2. Unboxing
2.1 Check Before Installation
2.2 In the Power Module Box
2.3 In the Battery Module Box
2.4 Optional Accessories and Service Parts
3. At a Glance
3.1 Anker SOLIX X1
3.2 Power Module
3.3 Battery Module
4. Pre-Installation
4.1 Select an Installation Site
4.2 Plan Conduit Run
4.3 Measure the Distance
Stacking
Equipment Dimensions
Installation Clearance
Maximum Length of Signal Cable
4.4 Prepare Tools and Supplies
Required Tools
Required Supplies
5. Installation
5.1 Floor Mounting
Step 1: Mark pilot holes for the first module.
Step 2: Mark pilot holes for the remaining modules.
Step 3: Attach mount brackets to the wall.
Step 4: Mount modules onto the brackets.
5.2 Wall Mounting
Step 1: Install the baseplate and bracket holders.
Step 2: Mark pilot holes on the wall.
To Next Page
Need help?
General
