18
[1] Cursor
[2] Markers
When touching a marker button of to , the marker moves
to the cursor position.
[3] Rotary knob icon
This icon shows the speed at which the cursor moves when turning
the rotary knob. The cursor movement speed is toggled by pressing
the rotary knob.
: The cursor moves quickly.
: The cursor moves slowly.
[4] Marker buttons
to : Places the marker of its number at the cursor position.
Put All: Places the markers as follows:
Marker —On the left side of
Marker —Cursor position
Marker —Falling point
Marker —On the right side of
Auto Marker: Locates the point of change near the cursor in the
displayed trace and automatically places Markers ,
, and . If a peak is detected between
and , a triangle marker
is placed at the peak. If
there is no point of change, a marker is placed near the
center of the graph area.
Clear: Clears all markers.
: Moves the marker to the point of change in the leftward
of the cursor.
: Moves the marker to the point of change in the
rightward of the cursor.
To Next Page