User Manual
10
Press [OK] key to enter setting interface:
Press [ IN] or [OUT] key to select employee‘s ID or press [OK] to input user ID:
After input user ID, press [OK] to enter setting interface.
Setting employee‘s verify mode through [ IN] or [OUT] key, then press [OK] key to
confirm and enter save interface:
Then press [OK] key to save; Press [C] key to cancel this operation.
2.4.4 Group Setup
Group is based on time zones. One group can set max 4 time zone. There are supply 16
groups. Normally, system will default group 0 as normal close, group 1 as normal open.
In [User] menu, press [ IN] or [OUT] key to select [Group Setup] option.
Press [OK] key to enter group setup interface.
To Next Page
Loading...
Need help?
General
