User Manual
31
Recover the user information back to the terminal from USB flash driver.
Press [ IN] or [OUT] key to select [User Record] option, press [OK] key to recover
the user records.
After recover, Press [C] key exit and back to upper menu.
2.7 System Info
System info shows the current usage status of device, such as user quantity, fingerprint
quantity, records quantity and the firmware version etc.
In management mode, press [ IN] or [OUT] key and shift to [System Info] option,
Press [OK] key to enter system info interface, and check info of correct operated device.
User: Registered user number in device
FP: registered fingerprints number. Select it and press [OK] key and you can check the
password and card number .
Log:The number of the attendance record stored in the device.
Serial: The unique identifier of the device and cannot be modified.
FirmVer: the firmware version of program which write in EROM or EPROM
(Programmable read only memory). So called firmware is firm program saved in
integrated circuit firmly, responsible for controlling and dealing with integrated circuit.
There are two methods for recover the data:
Copy BAK.YG and BAK.ZW files to root direction of the USB flash driver, and put
USB flash driver into terminal USB port to recover the records；
To Next Page
Loading...
Need help?
General
