Anviz A series User Manual

User Manual
12
Press [OK] to start adding admin.
Input the user ID i.e. 8101. Press [OK] key to enter admin setup save interface.
Press [OK] key again to confirm saving. After adding completed, exit to admin setup
interface.
You can press [OK] key to continuously add other admin, and press [C] to exit as well.
After adding admin, it needs the verification of the administrator‘s fingerprint to enter
Menu. The interface is as following:
2.4.6 Admin Clear
Select [Admin Clear] option in [User] menu.

Anviz A series Specifications

General

Brand	Anviz
Model	A series
Category	Touch terminals
Language	English