www.anycubic.com
4
Safety Instructions
Please contact our customer service first if you have any
problem after receiving the products.
Be cautious when using the scraper. Never direct the scraper
towards your hand.
In case of emergency, please immediately cut off the power of
ANYCUBIC 3D printer and contact the technical support.
ANYCUBIC 3D printer includes high speed running parts that can
cause injury.
It is recommended to use protection glasses when
cleaning/sanding the printed models to avoid small particles in
eyes.
Keep the ANYCUBIC 3D printer and its accessories out of the reach
of children.
Vapors or fumes may be irritating at operating temperature.
Always use the ANYCUBIC 3D printer in an open and well ventilated
area.
ANYCUBIC 3D printer must not be exposed to water or rain.
ANYCUBIC 3D printer is designed to be used within ambient
temperature ranging 8ºC-40ºC, and humidity ranging 20%-50%.
Working outside those limits may result in low quality printing.
Do not disassemble ANYCUBIC 3D printer, please contact technical
support if you have any question.
To avoid any unnecessary damage to the printer or individual injury,
please always follow the safety instructions when assembling and using
the machine.
To Next Page
Loading...
