Do not attempt to boat in severe weather conditions. Death or serious injury can occur. Get
to shore before the weather turns bad.
The significant wave height is the mean height of the highest 1/3 of the waves, which
approximately corresponds to the wave height estimated by an experienced observer. Some
waves will be double this height.
3.3 ENGINE REQUIREMENTS
Your boat is designed to be propelled by a single outboard engine. The maximum
propulsion power rating for the boat is 312 kW. Do not operate this boat with an
engine power rating higher than the maximum power rating rated by the Anytec. The
said label is located at the helm, under the Capacity plate. Unless Anytec installs the
engine, it is the responsibility of the party installing the engine to comply with all
specifications, rules and regulations related to outboard engines.
Do not hesitate to ask for an introduction to engine operation and maintenance, and
always read the engine, engine control and engine instrumentation manuals thoroughly.
Anytec strongly recommend that you fully comply with the owner’s manual provided by the
engine manufacturer.
Do not operate this craft with an engine of rated power greater than that posted on the
capacity label. Do not operate at maximum speed while in congested waterways, or in
weather or sea conditions of reduced visibility, high winds or large waves. Reduce speed and
wake as a courtesy to others. Observe & obey speed limits and no wake zones. Study this
manual carefully before starting the engine and operate the boat.
To Next Page
Loading...