ANYTEC A27 - Measures After Winter Storage

6. MAINTENANCE__PAGE 72
6. MAINTENANCE
Routine inspection, service and maintenance of your boat, systems and components are
vital to assure your safety, and will prolong the life of your boat.
Maintenance of Anytec manufactured parts are described in detail in this chapter.
Specialists manufacture other parts such as engine and navigation systems. To ensure the
best possible instructions, we sometimes refer to the specific OEM maintenance
manuals. These are provided with the boat (please check the Anytec document bag).
This applies to the following components (reference is given to the operations chapter in
this boat manual):
Component/system with separate manuals
Reference chapter in this owner’s
manual
Fire extinguisher
Chapter 2.4.1
Webasto heater (optional)
Chapter 2.4.5
Kitchen module (stove, pumps, fridge)
Chapter 4.13
Engbo anchor windlass
Chapter 4.14
Bow Thruster
Chapter 4.15
Stereo (optional)
Chapter 4.17
Engine power steering
Chapter 4.2
Camera with infrared
Chapter 4.21
Search light
Chapter 4.22
VHF radio
Chapter 4.23
Navigation lights
Chapter 4.3
Bilge pumps
Chapter 4.4
Simrad navigation systems
Chapter 4.5
Engine controls
Chapter 4.6
Simrad wireless network
Chapter 4.5.1
Zipwake dynamic trim control system
Chapter 4.7
Electrical system, switches and batteries
Chapter 5
The interval between necessary service and maintenance is highly variable, depending on
the environment in which your boat will be used, and how much you use it. For example,
corrosion of boat parts and components occur far more rapidly in a salt water
environment than on a boat which is used in fresh water.