4.14 STERN ANCHOR WINDLASS (OPTIONAL)
The anchor windlass located at the electrical compartment (PS) assists with anchoring of
your boat by lifting and lowering the anchor using an electric motor. The windlass is
operated from the helm or the remote controller.
1. Anchor 4. Windlass
2. Anchor holder 5. Windlass switch panel
3. Anchor line
Improper handling and maintenance of the windlass may cause serious accidents and the boat
may sink. Study the windlass manual carefully before operating it for the first time. Always
make sure the anchor is fastened properly in its position with the securing strap before the
boat is moving, as a drop of anchor at speed may cause severe damages and injuries.
For complete instructions on operation and maintenance, we refer to the separate OEM
owner’s manual that was developed specifically for this equipment. It is provided with the
Anytec document bag.
To Next Page
Loading...